◀ Previous: 8. Clips Tab (Many Animations at Once) · 🏠 WC Animation Tools · Next: 10. Retarget Tab ▶


The Skeletons tab changes bone layouts. Use it to:

<aside> 🛡️

Nothing you start from is changed. Every tool here makes new assets. Your original character, mesh and skeleton stay exactly as they were. (The one exception is Replace In Place under Convert Animations To Layout, which always asks first.)

</aside>

Opening it

rc9pKzqwBf.png

Map To Mannequin

Turns a humanoid character's bones into the Mannequin's, so the Mannequin's animations play on it.

Use it when you buy or make a character with its own skeleton and want it to use your Mannequin animations, montages and Anim Blueprints without retargeting every one.

Step by step

  1. Character Mesh: pick your character's skeletal mesh.
  2. Mannequin Mesh: pick the Mannequin mesh (for example SKM_Manny). If you set Mannequin Mesh in Project Settings, it's already filled in.
  3. Click Find Bones. A table fills in: one row per character bone.
  4. Read down the table and check it looks right (see The table below). Change any row you disagree with.
  5. Choose the options (see The options below). The defaults suit most characters.
  6. Output folder: pick where the new assets go, or click Use Content Browser Folder.
  7. New mesh name: type a name, or leave the suggested one (your character's name + _Mannequin).
  8. Click Map To Mannequin.
  9. You get:
  10. Click Open to look at the new mesh, or Show to find it in the Content Browser. Then File > Save All.

The table

Column What it shows
Character Bone A bone on your character.
Becomes What happens to it. A Mannequin bone name = it becomes that bone. Fold into its parent = it's removed and its skin weight goes to its parent. Keep (the skeleton gains it) = it stays as an extra bone. Click it to change.
Found By How the match was made (below).

Found By words:

Word Means
rig type Epic's rig recognition knew this kind of rig and placed the bone. The most reliable.
shape Placed by where the bone sits on the body.
same name The Mannequin has a bone of the same name (ignoring prefixes and capitals).
twist A twist bone of an arm or leg.
no weight Nothing is skinned to it or anything under it, so it's folded.
extra Nothing matched, so it's kept as an extra bone.
changed by you You changed this row.

<aside> 💡

If the meshes change after Find Bones, Map To Mannequin refuses with the meshes changed since Find Bones. Click Find Bones again.

</aside>

The options

Option What it does
Put on the Mannequin's skeleton On: the new mesh uses the Mannequin's own skeleton, so every montage, Anim Blueprint, blend profile and slot works exactly as on the Mannequin. Off: it gets its own skeleton, marked compatible with the Mannequin's.
Match the Mannequin's pose Poses the new mesh like the Mannequin (arms, hands, facing). The body moves with its bones.
Match the Mannequin's bone axes Turns every bone to point the same way as the Mannequin's (the body doesn't move). Always on when the mesh goes on the Mannequin's skeleton, because animations play bone turns directly.

Any bones the Mannequin has that your character doesn't (like the IK bones) are added. The result line lists them.

Then give it a character Blueprint

After mapping, click Copy Character To This Mesh... to jump to the Retarget tab with the new mesh ready as the target. See 10. Retarget Tab.

If it won't work

Message What to do
The character isn't standing up: reimport it upright. Reimport the mesh so it stands up straight.
[mesh] has no source mesh data... The mesh was cooked or stripped. Reimport it from its source file (FBX or similar).
Refused: pick the character and the Mannequin and press Find Bones first. Do steps 1 to 3 first.

Set Up Translation Retargeting

Sets up a skeleton so animations from other skeletons keep its own proportions (a tall character's animations don't squash a short one).

  1. Pick the Skeleton.
  2. Click Set Up Translation Retargeting.
  3. Every bone gets Epic's usual setting: the root Animation, the pelvis Animation Scaled, everything under the pelvis Skeleton, the rest Animation.
  4. Save the skeleton.

Convert Skeleton Layout

Makes a new mesh from a mesh, with bones inserted, folded, renamed, moved or added, following a Bone Layout Conversion asset.

The mesh's shape never moves. Skin weights carry over exactly, and every LOD, socket, physics body, constraint and cloth binding follows. The source mesh is never changed.

Step by step

  1. Source Mesh: pick the mesh to convert.

  2. Layout: pick a Bone Layout Conversion asset. Don't have one? Click one of the ready-made buttons:

    Each makes the layout asset in the output folder and picks it.

  3. Target Skeleton (optional): a skeleton that already has the new layout. It's used to place new bones where that skeleton has them.

  4. Make a new skeleton:

  5. Output folder and New mesh name (suggested: the source name + the layout name).

  6. Click Convert.

  7. Read the report. Each rule says what it did, or why it was Skipped.

  8. Click Open or Show, then File > Save All.

Bone Layout Conversion assets

A Bone Layout Conversion is a list of rules that run top to bottom. A rule that names a bone the mesh doesn't have is skipped (and reported).

Make one: Content Browser > Add > Animation > WC Animation Tools > Bone Layout Conversion. It asks what to start from: UE4 Mannequin to UE5 Mannequin, UE5 Mannequin to UE4 Mannequin, Add Root Bone or Empty.

| --- | --- | --- |

The Details panel only shows the settings the chosen rule uses. Description is a box for your own notes about the layout.

Convert Animations To Layout

Copies animations onto a new bone layout with exact maths, so every pose stays the same. An inserted bone takes its share of the turn and the old bone keeps the rest; folding puts them back together.

Montages, blend spaces and composites are converted too, and point at the converted clips.

Step by step

  1. Layout: the same Bone Layout Conversion you used for the mesh.
  2. Target Skeleton: the skeleton that has the new layout (the one your converted mesh uses).
  3. Target Mesh (preview): the converted mesh.
  4. Select the sequences, montages, blend spaces and composites in the Content Browser, then click Add Selected.
  5. Output folder and Suffix (suggested: _ + the target skeleton's name).
  6. Click Convert.
  7. File > Save All.

<aside> ⚠️

</aside>


◀ Previous: 8. Clips Tab (Many Animations at Once) · 🏠 WC Animation Tools · Next: 10. Retarget Tab ▶